The Rack: 45° Internal Corner MDFRegular price $18.49
The Rack: 45° Internal Corner. 2 of these units will create the same footprint as 1 x 90° Internal Corner. Thus allowing for different paints to be selected and sit side by side.
Dimensions: 190mm Wide (from opposite corners) x 200mm Deep (Side Panel) x 165mm High (Side Panel)
Construction Material: Medium Density Fiber Board. MDF is dense, flat, stiff, and has no knots like grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as is the case with lumber). Unlike most plywoods, MDF contains no voids and delivers crisp edges.
Please note: All MDF parts are supplied with no burn on the front and rear surfaces of the material (there will still be burn on the 3mm edge from the cut).
YOU DO HAVE THE OPTION to have the burn effect left intact for a discounted price. Please select your desired option from the menu included above.
Includes: All MDF parts for construction and
- Stainless Steel Nuts, Bolts & Washers for Assembly (PVA glue can still be used, but not necessary)
- Silicone Rubber Feet for a non-slip unit
- Rare Earth Magnets and locators to allow each modular unit to join to the next.
- Easy to follow YouTube Assembly Instructions below:
Choose from the above menu what paint bottle style you would like your rack to hold prior to adding to your cart.
|Brand||Bottle Quantity Held||Hole Diameter (mm)|
AK Interactive Jars
|GW Hexagon (new)
GW Hexagon (old)
|Current Citadel GW
Model Master 14.7ml
If you want your rack to hold different brands of paint then select the brand that uses the largest hole diameter. Smaller sized brands will then still fit, they will then just have more clearance around the outside of the pot.