Soft and Flexible (great for making moulds with deep undercuts)
Easy to mix 1:1 Ratio by Volume
Apply to vertical surfaces without sagging.
Rebound® silicone rubbers are easy-to-use platinum-cure silicone rubbers that self-thicken for making brush-on moulds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound® can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber.
Have you been using a Urethane Rubber to make Brush-On Molds? If so check out these advantages of using the Rebound® Silicone over the Urethane
Minimal surface preparation (Rebound won't stick to most surfaces)
Easy to mix two-part together (self thickens)
Longer library life
3 to 4 layers are all that is necessary to make a strong, durable production mould for casting wax, gypsum, concrete or resins (urethane, polyester, etc.) And because Rebound® is a platinum silicone, it will last for many years in your mould library. Applications include reproducing sculpture, architectural restoration, making candle moulds, etc.