Econ® 60 is an economical and fast-curing Shore 60A urethane rubber. It has no odour and features a convenient 1A:1B by volume mix ratio and low viscosity for easy mixing and pouring.
Working time is about 6 minutes and handling time is 4 hours at room temperature. Translucent clear amber colour (light passes through) makes Econ® 60 easy to colour with SO Strong®, UVO® or IGNITE® colourants.
Econ® 60 is used to make limited-run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. It is also suitable for coating fabrics.
Econ® 80 is an economical Shore 80A polyurethane rubber suitable for a variety of mold making and industrial applications. It is a lower-cost, faster cure alternative to our popular PMC®-780. Physical properties are lower vs. PMC®-780.
This is a no-odour system that features a 1A:1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight with minimal shrinkage. Econ® 80 is translucent and easily coloured with SO-Strong® or Ignite® colourants.
Econ® 80 is used to make short-run molds for casting concrete and resins, concrete stamping pads, rubber mechanical parts, coating fabrics, and pour-in-place gaskets for industrial equipment and burial vaults.
Due to the increased sales volume in the lead-up to Christmas, processing times have now been raised from the standard 2-4 to 7-10 business days as a worst-case scenario. Many parcels are heading out the door earlier than this. We appreciate your patience during our busiest time of year.