Acrylic Project Unit, Small
The Rack: The Drawer Unit, Small. A superb way to stay organised. Plenty of drawer space to hold all manner of hobby tools and supplies. Looking great when sitting up next to a paint rack in your workspace.
This unit shares the same footprint as all others in the 'Small' range, allowing units to be stacked evenly. Two 'small' units placed side by side will also create the same footprint as one 'Large' unit. So again, units can be stacked in a modular fashion.
Dimensions: 175mm Wide x 220mm Deep x 140mm High
Construction Material: External chassis & handles are made from coloured Acrylic, durable, rugged, and yet flexible, pleasing to the eye.
Internal drawer components and drawer runners are made from medium-density fibreboard (MDF). MDF is dense, flat, and stiff, with no knots like those in grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as in lumber). Unlike most plywood, MDF contains no voids and delivers crisp edges.
Please note: All acrylic and MDF parts are supplied with a mask layer on the front and rear surfaces. These layers should be removed before assembly. The mask layers will remove any unsightly burn marks from the MDF, while revealing the coloured acrylic, leaving you with a clean, crisp finish as pictured here.
Includes: All acrylic and MDF parts on sprues for construction and
- Stainless Steel Nuts, Bolts & Washers for Assembly (PVA glue can still be used with MDF components, but is not necessary)
- Silicone Rubber Feet for a non-slip unit
Tray sizes: Four (4) trays are supplied, and the modular design allows you to choose how many to fit and use. Tray measurements (internal) are 145mm wide x 180mm deep x 5mm high (lip).
Optional Add-ons: If you have either iron-based models (e.g., washers glued to plastic bases), please select 'Magnetic'; or magnetic-based models (e.g., magnetic base bottoms or magnets glued to bases), please select 'Magflex'. These self-adhesive-backed sheets are a great way to keep your models in place while moving your trays from rack to work area and vice versa—an extra layer of reliability.
Assembly: Two PDFs are required.
