Project Unit, Small
Regular price $24.95The Rack: The Project Unit, Small. A superb way to store your miniature building and painting projects. Plenty of space to hold squads of miniatures while you are working on them, and looking great when sitting up next to a paint rack in your workspace.
This unit shares the same footprint as all others in the 'Small' range, allowing units to be stacked evenly. Two 'small' units placed side by side will also create the same footprint as one 'Large' unit. So again, units can be stacked in a modular fashion.
Dimensions: 175mm Wide x 220mm Deep x 140mm High
Construction Material: Medium Density Fibre Board. MDF is dense, flat, and stiff, with no knots like those in grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as in lumber). Unlike most plywood, MDF contains no voids and delivers crisp edges.
Please note: All MDF parts are supplied with a mask layer on the front and rear surfaces. These layers should be removed before assembly. The mask will remove any unsightly burn marks from the MDF, leaving you with a clean, crisp finish as pictured here.
Includes: All MDF parts on sprues for construction and
- Stainless Steel Nuts, Bolts & Washers for Assembly (PVA glue can still be used, but is not necessary)
- Silicone Rubber Feet for a non-slip unit
Tray sizes: Four (4) trays are supplied, and the modular design allows you to choose how many to fit and use. Tray measurements (internal) are 145mm wide x 180mm deep x 5mm high (lip).
Optional Add-ons: If you have either iron-based models (like washers glued under plastic bases), please select 'Magnetic'; or magnetic-based models (like magnetic base bottoms or magnets glued under bases), please select 'Magflex'. These self-adhesive backed sheets are a great way to keep your models in place while moving your trays from rack to work area and vice-versa. An extra layer of reliability.
Assembly: Two PDFs are required.
