The Rack: The Drawer Unit, Small. A superb way to stay organised. Plenty of drawer space to hold all manner of hobby tools and supplies. Looking great when sitting up next to a paint rack in your workspace.
This unit shares the same footprint as all others in the 'Small' range, allowing units to be stacked evenly. Two 'small' units placed side by side will also create the same footprint as one 'Large' unit. So again, units can be stacked in a modular fashion.
Dimensions: 175mm Wide x 220mm Deep x 140mm High
Construction Material: Medium Density Fibre Board. MDF is dense, flat, and stiff, with no knots like those in grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as in lumber). Unlike most plywood, MDF contains no voids and delivers crisp edges.
Please note: All MDF parts are supplied with a mask layer on the front and rear surfaces. These layers should be removed before assembly. The mask will remove any unsightly burn marks from the MDF, leaving you with a clean, crisp finish as pictured here.
Includes: All MDF parts on sprues for construction and
- Stainless Steel Nuts, Bolts & Washers for Assembly (PVA glue can still be used, but is not necessary)
- Silicone Rubber Feet for a non-slip unit
Drawer options and sizes: Available in 4 varieties, you can choose from 2-, 3-, or 4-drawer layouts as well as a 2-drawer 50/50 split. Drawer measurements (internal) are:
- All variations are 145mm wide x 180mm deep
- 2 Drawer - 1 x 38mm high, 1 x 83mm high.
- 2 Drawer 50/50 - 2 x 60mm high
- 3 Drawer - 3 x 38mm high.
- 4 Drawer - 3 x 23mm high, 1 x 38mm high.
Assembly: Two PDFs are required.
- Download Assembly PDF
- Download Hardware Guide PDF
