Econ® 60 is an economical and fast-curing Shore 60A urethane rubber. It has no odour and features a convenient 1A:1B by volume mix ratio and low viscosity for easy mixing and pouring.
Working time is about 6 minutes and handling time is 4 hours at room temperature. Translucent clear amber colour (light passes through) makes Econ® 60 easy to colour with SO Strong®, UVO® or IGNITE® colourants.
Econ® 60 is used to make limited-run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. It is also suitable for coating fabrics.
Econ® 80 is an economical Shore 80A polyurethane rubber suitable for a variety of mold making and industrial applications. It is a lower-cost, faster cure alternative to our popular PMC®-780. Physical properties are lower vs. PMC®-780.
This is a no-odour system that features a 1A:1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight with minimal shrinkage. Econ® 80 is translucent and easily coloured with SO-Strong® or Ignite® colourants.
Econ® 80 is used to make short-run molds for casting concrete and resins, concrete stamping pads, rubber mechanical parts, coating fabrics, and pour-in-place gaskets for industrial equipment and burial vaults.
If you had an account with our previous site you may be able to reinstate it here. We have had some luck bringing account details and purchase history over to the new site.
Please note: a new password will need to be created here in connection with your previously registered email address, using the 'Forgot?' password link on the Log In page.
If you have any issues with either logging in, account set up or any other site problem, please dont hesitate to get in contact with us at email@example.com and we can help you from our end. Thank you.