Realist Water, 30gms

Use Realist Water to model still or slow-moving water, such as puddles and creeks on your bases. No mixing needed. Able to be poured directly from the bottle with the precision applicator. It is self-levelling and water-soluble, and shrinkage is minimal.

DIRECTIONS: DO NOT SHAKE!!! You will create unwanted bubbles that will need to be removed later. Pour RW into your crevice, depression or creek bed where required. Use a toothpick to push the liquid into tight corners and also to remove unwanted air bubbles, if any. Do not pour more than 3mm thick at one time. Allow to dry for 24 hours or until a clear result is achieved. For deeper water add layers of no more than 3mm, allowing 24 hours to dry between layers.