This item is always in stock.
The Rack: 45° Internal Corner. 2 of these units will create the same footprint as 1 x 90° Internal Corner. Thus allowing for different paints to be selected and sit side by side.
Dimensions: 190mm Wide (from opposite corners) x 200mm Deep (Side Panel) x 165mm High (Side Panel)
Construction Material: Medium Density Fiber Board. MDF is dense, flat, stiff, and has no knots like grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as is the case with lumber). Unlike most plywoods, MDF contains no voids, and delivers crisp edges.
Please note: All MDF parts in the videos and imagery supplied on this site have been lightly sanded to remove laser cutting scorch marks.
Includes: All MDF parts for construsction and
- Stainless Steel Nuts, Bolts & Washers for Assembly (PVA glue can still be used, but not neccessary)
- Silicone Rubber Feet for a non slip unit
- Rare Earth Magnets and locators to allow each modular unit to join to the next.
- Easy to follow DVD Assembly Instructions
Choose from the above menu what paint bottle style you would like your rack to hold prior to adding to cart.
| Brand |
Bottle Quantity Held |
Hole Diameter (mm) |
| Minitaire 60ml, Tamiya 10ml Acrylic, Folkart 59ml, AK Interactive Jars |
11 |
36 |
| GW Hexagon (new), GW Hexagon (old), Lifecolor |
12 |
34.5 |
| GW 2012, Model Master 14.7ml |
12 |
33 |
| Foundry, Coat D'Arms, GW Round, P3 |
15 |
30.5 |
| Dropper Bottles: Vallejo, Reaper Master, Army Painter, AK Interactive |
15 |
25.5 |
If you want your rack to hold different brands of paint then select the brand that uses the largest hole diameter. Smaller sized brands will then still fit, they will then just have more clearance around the outside of the pot.
Click 'More Images' on the tab above to see possible combinations of 'The Rack'.
