This item is always in stock
Five (5) laser cut Coherency Movement Plates for table top wargaming. Each plate is made up from:
- Two (2) Laser cut 3mm MDF (Medium Density Fibreboards), the top piece being cut with a hole to fit 1 x 25mm based miniature. Designed for units that need to move in a cohesive formation (keeping them at their maximum 2 inches apart) to minimise template weapon damage, yet remain at their best strength.
- As each model will be on its own 1" plate, by placing 2 plates (and models) next to each other then creates the desired 2" coherency.
- Keeps units moving across the table with maximum flexibility. Eliminate the use of the tape measure having to check your units repeatedly. Simply make sure all models and their respective plates are touching and all models are in coherency.
- Simply glue the top piece to the bottom and your tray is ready for having details added.
MDF is dense, flat, stiff, and has no knots like grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as is the case with lumber). Unlike most plywoods, MDF contains no voids, and delivers crisp edges. Use PVA Wood glue to attach your favourite basing materials so it matches your already based models.
Different sizes available. Use the pull down menu above to choose your size then proceed by selecting the amount of trays in that size, then adding it to your cart. Larger sizes will affect the base price. Sizes listed with base size x amount of models.