This item is always in stock
One (1) laser cut Mag-flex Movement Tray for table top wargaming. Choose from our extensive range of sizes. This pack is made up from:
- One (1) Laser cut 3mm MDF (Medium Density Fibreboard), supplied with a 4mm mitred lip (three peices, one being for the front and two for the sides). The lip can be glued in place with either super glue (for an instant fit) or PVA wood glue (for a slower, more controlled bond)
- One (1) Laser Cut 0.7mm Flexible Steel insert (non magnetised) with adhesive backing. No glue required for fixing
- Enough 3mm x 2mm Disc Rare Earth Magnets for the appropriate amount of figures that fit on your selected size tray. Larger bases going on the tray get more magnets per base, i.e. 20mm & 25mm 1 magnet per base, 40mm and 50mm 4 magnets per base, 50mm x 25mm 2 magnets per base.
- Simply glue your magnets to the hollow underside of your plastic base, and you'll then be ready to move your troops around the table without them falling over.
MDF is dense, flat, stiff, and has no knots like grained plywood. Its fine particles provide dimensional stability without a predominant "grain" (as is the case with lumber). Unlike most plywoods, MDF contains no voids, and delivers crisp edges. Use PVA Wood glue to attach your favourite basing materials so it matches your already based models.
Many different sizes available. Use the pull down menu above to choose your size then proceed by selecting the amount of trays in that size, then adding it to your cart. Larger sizes will affect the base price. Sizes listed with width (front face) x depth.
If you dont see your required size listed, please contact us an we will add it for you.
^^^ Check out the instructional video!!! ^^^